LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD

ADI LT1620CS8#PBF

Hersteller
Herst.-Teilenr.
LT1620CS8#PBF
LCSC-Nr.
C664404
Verp.
SO-8
Kundennummer
Hauptmerkm.
1 0V~32V SO-8 Instrumentation, Op Amps, Buffer Amps RoHS
DatenblattADI LT1620CS8#PBF
RoHS-Konformität1 Dokumente verfügbar
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps
HerstellerADI
Verp.SO-8
Output Current-
Number of Channels1
Vcm - Common Mode Voltage0V~32V
Vos - Input Offset Voltage-
Slew Rate-
Operating Temperature0℃~+70℃
Ib - Input Bias Current-
Common Mode Rejection Ratio(CMRR)-
Input Offset Voltage Drift(Vos TC)-
-3dB Bandwidth-
Quiescent Current-
Gain-
FeaturesExternal shunt;Analog output interface
Input Voltage Noise Density-
Differential Voltage0V~125mV
Dual Supply-
Single Supply-

Beschreibung

KI-Übersetzung

The LT1620 simplifies the design of high performance, controlled current battery charging circuits when used in conjunction with a current mode PWM controller IC. The LT1620 regulates average output current independent of input and output voltage variations. Output current can be easily adjusted via a programming voltage applied to the LT1620’s PROG pin. Most current mode PWM controllers have limited output voltage range because of common mode limitations on the current sense inputs. The LT1620 overcomes this restriction by providing a level-shifted current sense signal, allowing a 0V to 32V output voltage range. The 16-pin version of the LT1620 contains a programmable low charging current flag output. This output flag can be used to signal when a Li-Ion battery charging cycle is nearing completion. The LT1621 incorporates two fully independent current control circuits for dual loop applications.

Merkmale

KI-Übersetzung
  • Accurate Output Current Programming
  • Usable in Charging Applications Up to 32V Output
  • Programmable Load Current Monitor for End-of-Charging-Cycle Notification (16-Pin Version)
  • Dual Function IC (LT1621) Allows Convenient Integration of Load and Input Current Sensing
  • Level-Shifted Current Sense Output for Current Mode PWM Controllers
  • Can be Used for NiCd, NiMH, Lead-Acid and Lithium-Ion Battery Charging
  • Greater than 96% Efficiency Possible in Charger Applications
  • High Output Currents Possible: > 10A Easily Obtained

Anwendungen

KI-Übersetzung
  • High Current Battery Chargers
  • High Output Voltage DC/DC Converters
  • Constant Current Sources
  • Overcurrent Fault Protectors