LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD

MXIC MX25R6435FBFIL0

Hersteller
Herst.-Teilenr.
MX25R6435FBFIL0
LCSC-Nr.
C6330263
Verp.
WLCSP-22
Kundennummer
Hauptmerkm.
64M-BIT CMOS Serial Multi-I/O Flash Memory
DatenblattMXIC MX25R6435FBFIL0
Alternativteile2
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Memory/Memory
HerstellerMXIC
Verp.WLCSP-22
Operating Temperature-40℃~+85℃
FeaturesWrite enable latch;Power-on reset;Hardware Write Protection;Software Write Protection;Absolute Write Protection
Memory Size64Mbit
Voltage - Supply1.65V~3.6V
Program / Erase Cycles100,000 cycles
Clock Frequency80MHz
Data Retention - TDR (Year)20 Years
Block Erase Time(tBE)-
Write Cycle Time(tWC)-
Page Programming Time (Tpp)3.2ms
Standby Supply Current-
InterfaceSPI

Merkmale

KI-Übersetzung
  • Ultra Low Power Mode and High Performance Mode
  • Wide Range VCC 1.65V - 3.6V for Read, Erase and Program Operations
  • Unique ID and Secure OTP Support
  • Multi I/O Support - Single I/O, Dual I/O and Quad I/O
  • Program Suspend/Resume & Erase Suspend/Resume
  • Supports Serial Peripheral Interface -- Mode 0 and Mode 3
  • 67,108,864 x 1 bit structure or 33,554,432 x 2 bits (two I/O mode) structure or 16,777,216 x 4 bits (four I/O mode) structure
  • Equal Sectors with 4K byte each or Equal Blocks with 32K/64K byte each - Any Block can be erased individually
  • Single Power Supply Operation - Operation Voltage: 1.65V - 3.6V for Read, Erase and Program Operations
  • Latch-up protected to 100mA from -1V to Vcc + 1V
  • High Performance - Fast read - 1 I/O: 80MHz with 8 dummy cycles - 2 I/O: 80MHz with 4 dummy cycles, equivalent to 160MHz - 4 I/O: 80MHz with 2+4 dummy cycles, equivalent to 320MHz - Fast program and erase time - 8/16/32/64 byte Wrap-Around Burst Read Mode Support Performance Enhance Mode - XIP (execute-in-place)
  • Ultra Low Power Consumption
  • Minimum 100,000 erase/program cycles
  • 20 years data retention
  • Input Data Format - 1-byte Command code
  • Advanced Security Features - Block lock protection The BP0 - BP3 status bit defines the size of the area to be software protection against program and erase instructions
  • Additional 8K bits secured OTP - Features unique identifier. - Factory locked identifiable and customer lockable
  • Auto Erase and Auto Program Algorithm - Automatically erases and verifies data at selected sector or block - Automatically programs and verifies data at selected page by an internal algorithm that automatically times the program pulse widths (Any page to be programed should have page in the erased state first)
  • Status Register Feature
  • Command Reset
  • Program/Erase Suspend and Program/Erase Resume
  • Electronic Identification - JEDEC 1-byte manufacturer ID and 2-byte device ID - RES command for 1-byte Device ID - REMS command for 1-byte manufacturer ID and 1-byte device ID
  • Support Serial Flash Discoverable Parameters (SFDP) mode
  • Support Unique ID
  • SCLK Input - Serial clock input
  • SI/SIO0 - Serial Data Input or Serial Data Input/Output for 2 x I/O read mode and 4 x I/O read mode
  • SO/SIO1 - Serial Data Output or Serial Data Input/Output for 2 x I/O read mode and 4 x I/O read mode
  • WP#/SIO2 - Hardware write protection or serial data Input/Output for 4 x I/O read mode
  • RESET#/SIO3 * or HOLD#/SIO3 * - Hardware Reset pin