LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
MICROCHIP MCP14E5T-E/SN product image
Abbildung ähnlich

MICROCHIP MCP14E5T-E/SN

Hersteller
Herst.-Teilenr.
MCP14E5T-E/SN
LCSC-Nr.
C622996
Verp.
SOIC-8
Kundennummer
Hauptmerkm.
4.5V~18V 4A 4A SOIC-8 Gate Drivers RoHS
DatenblattMICROCHIP MCP14E5T-E/SN
RoHS-Konformität2 Dokumente verfügbar
Alternativteile2
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 1.9958$ 2.00
200+$ 0.7733$ 154.66
500+$ 0.7455$ 372.75
1,000+$ 0.7317$ 731.70
Standardgehäuse3300/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/Gate Drivers
HerstellerMICROCHIP
Verp.SOIC-8
Input Logic Level - Low-
Low Level Delay Time-
High Level Delay Time-
Quiescent Current-
Input Logic Level - High-
Voltage - Supply4.5V~18V
Operating Temperature-40℃~+150℃
Driven ConfigurationFull bridge
Current - Output Low(IOL)4A
Rise Time15ns
Fall Time18ns
FeaturesEnable shutdown;Interleaved conduction protection
Current - Output High(IOH)4A
Load TypeMOSFET

Beschreibung

KI-Übersetzung

The MCP14E3/MCP14E4/MCP14E5 devices are a family of 4.0A buffers/MOSFET drivers. Dual-inverting, dual-noninvertering, and complementary outputs are standard logic options offered. The MCP14E3/MCP14E4/MCP14E5 drivers are capable of operating from a 4.5V to 18V single power supply and can easily charge and discharge 2200 pF gate capacitance in under 15 ns (typical). They provide low impedance in both the ON and OFF states to ensure the MOSFET’s intended state will not be affected, even by large transients. The MCP14E3/MCP14E4/MCP14E5 inputs may be driven directly from either TTL or CMOS (2.4V to 18V). Additional control of the MCP14E3/MCP14E4/MCP14E5 outputs is allowed by the use of separate enable functions. The ENB_A and ENB_B pins are active high and are internally pulled up to VDD. The pins maybe left floating for standard operation. The MCP14E3/MCP14E4/MCP14E5 dual-output 4.0A driver family is offered in both surface-mount and pinthrough-hole packages with a -40°C to +125°C temperature rating. The low thermal resistance of the thermally enhanced DFN package allows for greater power dissipation capability for driving heavier capacitive or resistive loads. These devices are highly latch-up resistant under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking (of either polarity) occurs on the ground pin. They can accept, without damage or logic upset, up to 1.5A of reverse current being forced back into their outputs. All terminals are fully protect against Electrostatic Discharge (ESD) up to 4 kV.

Merkmale

KI-Übersetzung
  • High Peak Output Current: 4.0A (typical)
  • Independent Enable Function for Each Driver Output
  • Low Shoot-Through/Cross-Conduction Current in Output Stage
  • Wide Input Supply Voltage Operating Range: - 4.5V to 18V
  • High Capacitive Load Drive Capability: - 2200 pF in 15 ns (typical) - 5600 pF in 26 ns (typical)
  • Short Delay Times: 50 ns (typical)
  • Latch-Up Protected: Will Withstand 1.5A Reverse Current
  • Logic Input Will Withstand Negative Swing Up To 5V
  • Space-Saving Packages: - 8-Lead 6x5 DFN, PDIP, SOIC

Anwendungen

KI-Übersetzung
  • Switch Mode Power Supplies
  • Pulse Transformer Drive
  • Line Drivers
  • Motor and Solenoid Drive

Alternativteile

MPNHerstellerAlternativtypVerpackungVerfügbarkeitStückpreis
MCP14E5-E/SNMICROCHIPDirektSOIC-866$ 2.0322
MCP14A0454T-E/SNMICROCHIPÄhnlicheSOIC-810$ 2.6169