LCSC Electronics logoLCSC Electronics svg logo
Zaloguj
USD
Koszyk
PANASONIC PM-T45 product image
  • PM-T45 thumbnail 1
  • PM-T45 thumbnail 2
  • Rozmieszczenie wyprowadzeń
  • Footprint
Zdjęcia poglądowe

PANASONIC PM-T45

Producent
PANASONIC
Nr części prod.
PM-T45
Nr LCSC
C5296745
Opak.
-
Numer Klienta
Klucz. cechy
Amplifier Built-in U-shaped Micro Photoelectric Sensor
Karta KatalogowaPANASONIC PM-T45
Gwarancja na każde zamówienie
100% Oryginalne · Zwrot lub Wymiana w ciągu 30 Dni

Specyfikacje Produktu

Wszystko
TypOpis
KategoriaSensors, Transducers/Optical Sensors/Photointerrupters - Slot Type - Logic Output
ProducentPANASONIC
Opak.-
Fall time80us
Rise time20us
Voltage - Supply (Logic)5V~24V
Frequency Response3kHz
Output Logic Level - Low2V
Operating Temperature-25℃~+55℃
Slot Width6mm
Peak Wavelength855nm
Pomoc i opiniePokaż podobne produkty (0) >

Funkcje

Tłumaczenie AI
  • Standard triple protection circuits: ① Reverse power polarity protection ② Reverse output polarity protection ③ Output short-circuit protection — reduces risk of sensor failure due to miswiring
  • Beam emission/reception distance: 6 mm (0.236 in); beam emitter and receiver are 0.5 mm (0.02 in) thinner than conventional models, with 1 mm (0.039 in) increased spacing between emission and reception points — reduces risk of collision between sensing area and target object
  • Industry-first IP64 protection rating (as of April 2017, based on in-house survey)
  • PM-25/45 series uses original integrated molding method, eliminating grooves and gaps on the sensing surface and body — reduces risk of failure due to water splashing or dust ingress
  • Upper and lower beam limit positions can be visually confirmed from the front, rear, right, and left sides of the sensor unit, facilitating target object position adjustment
  • Large, multi-angle operation indicator (orange) — illuminates upon beam entry, easily visible from above and from the side
  • Compact footprint — significantly reduces mounting space when installed at the same pitch as conventional models, with direct drop-in replacement compatibility
  • All models support easy M3 screw mounting; some models require 1 M3 screw, others require 2 M3 screws (M3 screws and washers not included)
  • Vibration and shock resistant — stress concentration areas such as cable-to-internal circuit connections are encapsulated in resin, helping prevent failure due to vibration and shock
  • Available in a variety of form factors to accommodate a wide range of mounting conditions
  • Ultra-compact/cable-type PM-25 series supports easy M2/M3 screw mounting
  • Compact/connector-integrated PM-65 series enables one-touch connection using commercially available connectors