Littelfuse SMA6J28CA

The SMA6J series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

• Small DO - 214AC SMT footprint for minimal board space requirement
• Typical failure mode is a short circuit condition for current events exceeding component rating
• Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
• IEC 61000 - 4 - 2 ESD 30kV(Air), 30kV (Contact)
• ESD protection of data lines in accordance with IEC 61000 - 4 - 2
• Built - in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01%
• Fast response time: typically less than 1.0ps from 0 Volts to VBR min
• Typical IR < 1μA when VBR min > 12V
• High temperature reflow soldering guaranteed: 260°C/40sec
• UL Recognized compound meeting flammability rating V - 0
• Meet MSL level1, per J - STD - 020, lead - frame maximun peak of 260°C
• Matte tin lead–free plated
• Pb - free E3 means 2nd level interconnect is Pb - free and the terminal finish material is tin(Sn) (IPC/ JEDEC J - STD - 609A.01)

• TVS components are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications.