TI TRS3232ECDW

The TRS3232E device consists of two line drivers, two line receivers, and a dual charge-pump circuit, with pin-to-pin (serial port connection pins, including GND) ±15kV IEC ESD protection. The device complies with TIA/EIA-232-F requirements and provides an electrical interface between asynchronous communication controllers and serial port connectors. The charge pump and four small external capacitors support single-supply operation from 3V to 5.5V. These devices operate at data signaling rates up to 250kbps with a maximum driver output slew rate of 30V/μs.

• ESD protection for RS-232 bus pins
• ±15kV HBM, ±8kV (IEC61000-4-2, contact discharge)
• ±15kV (IEC61000-4-2, air-gap discharge)
• Meets or exceeds TIA/EIA-232-F and ITU V.28 requirements
• Powered by 3V to 5.5V VCC supply
• Interoperable with RS-232 at VCC as low as 2.7V
• Operating rate up to 250kbps
• Two drivers and two receivers
• Low supply current: 300 μA (typical)
• External capacitors: 4×0.1 μF
• Accepts 5V logic inputs with 3.3V supply
• Near chip-scale package (QFN-16, 3mm×3mm), 85% smaller than SOIC-16
• Pin-compatible with alternate high-speed device (1Mbps)
• SN65C3232E (-40℃ to +85℃)
• SN75C3232E (0℃ to 70℃)

• Industrial PC
• Wired networking
• Data center and enterprise computing
• Battery-powered systems
• Laptops
• PDAs
• Handheld devices